▲ 搭配普通冷却水空载可达-32℃~-40℃露点，搭配冷水机空载情况下，甚至可达-40℃以下露点；
▲ 除湿与再生连续循环工作，确保露点温度稳成一条直线；
▲ 转轮式蜂巢除湿干燥机采用陶瓷纤维为基材的蜂巢转轮，除湿效果好；
▲ 不产生污染确保塑胶品质；
▲ 转轮可耐1000℃高温以防火灾，防酸耐碱，平均寿命3-8年以上；
▲ 再生温度为180℃，比传统的热风干燥机节省2/3时间和30-40%的能源；
▲ 一台除湿机可以搭配数个独立干燥料斗使用。

▲ With the ordinary high water cooling set up to -32℃～-40 ℃ dew point, no-load conditions with cooling water downloaded, and even up to the dew point below -40℃.
▲ Desiccantand  regeneration continuous loop and ensure that the dew point temperature stability into a straight line.
▲ Using ceramic fiber for the base runner hives, dehumidifying effect is good.
▲ Do not produce pollution to ensure plastic’s quality.
▲ Wheel can be resistant to high temperature 1000 ℃ in case of fire, acid and alkali resistant, average life expectancy is up to 3-8 years.
▲ Regenerative temperature is 180℃, than traditional drying machine save two-thirds time and 30-40% of the energy .
▲ A dehumidifier can match a few independent drying hoppers to be used.